Page
| 1 | | 2 |
Click
the image for a larger view.
Current Officer's Rigs
| President
Eric Gray - V.P. 2008
Rig - Ford F-250
Engine - Ford 400
Tranny - NP435
TCase - NP208
Tires - 40" Swamper LTB's
Axles - Dana 60 Front Locked, 10.25
Sterling Rear Welded
Notes - Weld-On Beadlocks |
|
|
Vice President
Josh Dorr
Rig - 1993 Ford Ranger
Engine - 4.0L V6
Trans - 4-Speed Auto
TCase - BW1354
Axles - Dana 44 Front w/ Lockrite, Ford 8.8" Rear
Locked
Gears - 4:56's
Tires - 35x14.50x15 Boggers
Notes - 3 Link SAS Up Front, OBA, Weld-On Beadlocks |
|
| Secretary
James Pidgeon
Rig - 1991 Jeep XJ
Engine - 4.0L
Tranny - AX-15
TCase - NP321
Axles - Waggy Dana 44 Front w/Lockright,
Waggy AMC 20 Rear
Welded
Gears - 4.10's
Tires - 36x12.5x15 Super Swamper TSL's
Notes - Front custom hidden 3 link w/panhard bar on 4.5" coils and 1.75" spacers with all home-brew bracketry. Rear 4.5" leaf springs on 1.5" u-bolt eliminators, with relocated 1.5" lift shackles. High-draglink, and basically 100% replaced floors.
Build Thread -
Project Rotten Bottom |
|
Equipment Manager
Mark Mathe
Rig
- 1989 Ford F-350 Custom
Engine - 7.3L International Harvester
Diesel, burnin' the red stuff
Tranny - ZF 5-Speed
TCase - BW 1356
Axles -
High Pinion Kingpin Dana 60
Front w/Lock-Right, Sterling 10.25 Rear w/Lock-Right
Gears - 4.10's
Tires -
Currently 35x12.5x16.5 BFG MT's, soon
to be fo'ties or so
Notes -Mile
Marker 10,500lb. hydraulic winch, Stihl MS250 16" bar, Icom
2-meter KD8GBI, Cobra 40-ch. CB
|
|
Treasurer
Jake Ladd
Rig - 1989 F150
Engine - 300 I-6
Tranny - T18
TCase - BW 1356
Axles - 10.25 Sterling Rear, "TTB 4-Life"
Front
Gears - 4.10's
Tires & Rims -Custom Grooved 36"
Hummer Tires
Notes - The whole thing soon to be
"updated" |
|
| Webmaster
Jason
Socha
Rig - 1992 Jeep YJ
Engine - 2001 Chevy 5.3L Vortec V8
Tranny - Kustom Hydro SM465
TCase- NP205
Rims & Tires - 40" Ground Hawg's
Axles - Front Dana 60 Locked, Shaved
14-Bolt Rear Welded
Gears- 4.10's
Notes -Stretched to 100", SOA'd, AGR
Rock-Ram Hydro Assist with Drilled & Tapped PS Box, ECM
Tuned w/ HP Tuners
|
|
Current Member's Rigs |
|
Greg Austin
Rig - Chevy
Engine - 350
Tranny - TH350
TCase - NP205
Gears - 4.10's
Axles - Dana 60 Front, 14-Bolt Rear
Welded
Rims & Tires - 38 Swampers Right Now
Notes - Currently getting a turbo mocked
up, H1 Beadlocks, Tube Bed |
|
Eric
Wank and Brad Johnston
Rig - '92 GMC Jimmy
Engine - 4.3 Non Vortec
Tranny - 700R4
TCase - NP243
Tires - 33" TSL's
Axles - SAS Dana 30 Front, 8.5" Rear
Welded
Gears - 3.42's
Notes - Hopefully
a 350 Swap soon.
|
|
Heath Nunnemacher
Rig - 2002 WJ
Engine - 4.7L V8
Tranny - Auto 5
TCase- NV242
Tires - 33x12 MTs
Axles - Dana 30 Front Aussie Locked, Dana 44 Rear
Aussie Locked
Notes - 02WJ 6" lift, Aussie lockers, Rusty's tracbar, guard, skids, lights, and rack (with Hi-lift),ARB Front Bumper, Warn 8,000 lb w/Synthetic Line
|
|
Page
| 1 | | 2 |
|
